General information about humidifying using frequency nozzles

The Dan Fugt Denmark nozzles using compressed air humidify tap water or water cleaned through a reverse osmosis process, into a very fine atomization without the risk of condensation or water falling to the floor. Air- and water volumes are adjusted independently.

TDF-A

Frekvensdyse TDF / TDF–A

This is a special nozzle with many different applications. The nozzle is used where a very fine atomization is needed. When the water hits the adjustable frequency pin, the already fine drops of water are broken into even smaller particles (down to 2 my), that are absorbed in the surroundings very fast.The nozzle is often used for direct- item- and process humidification e.g. paper rolls before printing, wood and plastic before and after painting, in ventilation channels, dust reduction connected with grinding, sanding and sorting of e.g. potatoes and waste. The nozzle is ideal for use in cooling rooms, where the temperature is too low for other kind of humidification to be absorbed in the air. The frequency nozzle has a capacity of 5 – 16 litres of water pr. hour.

General information about control panels

Dan Fugt Denmark control panels ensure a fully automatic control of the Dan Fugt Denmark humidification systems. Based on each user’s specific needs and requirements, the control panel is programmed and set. The system is user friendly and has automatic fault finding in case any functional problems should arise. The Dan Fugt Denmark control panel is connected to a hygrostat (pneumatically, electrical or mechanical) which continuously measures the humidity level and controls the system accordingly.

VDR-H

TDR-A-H / TDR-A

On/Off control type VDR-H (max 3 zones)
This control panel has an electrical hygrostat and a digital display, showing the current relative humidity.

On/Off control type TDR-A
This control panel has no hygrostat and is WITHOUT digital display, showing the current relative humidity. Mechanical hygrostat is an option.

TDR-H / TDF

On/Off control TDR-H (max 3 zones)
This control panel has an electrical hygrostat and a digital display, showing the current relative humidity. Air- and water pressure can be controlled independently on the control panel.

On/Off control TDR
This control panel has no hygrostat and is WITHOUT digital display, showing the current relative humidity. Air- and water pressure can be controlled independently on the control panel. Mechanical hygrostat is an option.

VDR-H
VDR-H-CMX

TDR-H-CMX

Modulating or On/Off control TDR-A-H-CMX (max 4 zones)
The control panel has a built-in micro processor where many functions parameters can be adjusted and set. The control panel is ideal for areas with 1 or more zones and can control the following functions: measuring and adjustment of humidity and temperature levels, timing, setting of date and hour for humidification in cases where the system is switched off for a longer period. Fault finding is possible and data can be transferred to an integrated computer system.

TDR-A-H-TOUCH

Modulating or On/Off control TDR-A-H-TOUCH (unlimited number of zones)
Easy to program through a touch-screen which shows all parameters related to the function of the system. Is suitable for any number of zones. Ideal as a combined control panel for high pressure humidification and reverse osmosis water treatment. Very simple to operate. Depending on the requirements from the user, this panel can meet basically all specific requirements and expectations.

VDR-H-TOUCH
PDR-VS

PDR–T/K

Pneumatically modulating control PDR-T/K (max. 1 zone)
For room and channel humidification. The control panel operates pneumatically without any electrical connections. This type of panel is ideal when installed in rooms or channels where there is a risk of explosion e.g. painting areas and cabins.

top